A station can meet its production target while the customer still waits. Value stream mapping shows where material moves, where it waits and which instructions trigger the next move. Start with a current-state map based on observation. Then draw a future state that changes how work is released, transferred or replenished. Lean Enterprise Institute’s guide to value stream mapping explains both flows and the current- and future-state approach.
Build the current-state map
- Set the boundary. Choose one product family or material stream. Name the start, end and customer requirement.
- Follow the material. Walk the process with operators. Record process times, queue or buffer sizes, and elapsed time between handoffs.
- Trace the information. Identify who sets the schedule, who can release work, and what downstream signal can change the decision.
- Draw the timeline. Separate time spent moving or processing material from time spent waiting. Classify value-added work separately if you need a value-added ratio.
What to show on a value stream map
Draw the material flow from left to right and place the planning and release signals above it. Add a timeline below the flow. Use a legend so readers can distinguish movement, waiting and information at a glance.
- Supplier and customer. Show the external or internal supplier and customer at the map boundaries. Label what is supplied and what the customer needs, such as good units per shift or tonnes of plant feed at an agreed blend. Show delivery frequency where it affects the flow.
- Operation boxes and data boxes. Draw a rectangle for each operation. Put operating data beneath it, such as cycle time, changeover time, uptime, batch size or yield, where those measures help explain the flow. State the units and time basis.
- Inventory and delay points. Use an inventory triangle for material waiting between operations. Label the quantity and estimated dwell time where known. Mark delays such as a truck queue or a hold for inspection and label what is waiting. Identify controlled buffers and FIFO lanes, including their limits or release rules.
- Push and pull. Label a transfer as push when an upstream operation sends material based on its schedule or batch completion. Show pull with a downstream replenishment signal that authorises upstream work after consumption. A FIFO lane preserves sequence and can cap work in process. The release rule determines whether the flow is pull.
- Manual and electronic information flow. Connect planning, operations, suppliers and customers wherever they exchange orders, schedules, status or replenishment signals. A straight information arrow can represent manual communication such as a radio call, paper ticket or shift huddle. A lightning-shaped arrow can represent an electronic signal such as an ERP order, dispatch message or plant status feed. Label the direction, trigger and frequency where relevant.
- Timeline and improvement bursts. Show processing or movement time and waiting time below the operations and queues, then total the lead time. Use a kaizen burst to flag each improvement opportunity and explain what the team will investigate.
The two infographics below focus on the flow inside their stated boundaries. For an expanded manufacturing map, add the component supplier before preparation and the shipping or order-fulfilment team after packing. Label the scheduled releases in the current state and the replenishment signal from packing in the future state. For mining, show the upstream mining team supplying material and the plant as the internal customer. Label whether each dispatch or intake signal is a radio call, an electronic update or another channel actually observed in the operation.
Cycle time and lead time
Cycle time measures how often a process completes a unit, tote or load. For a steady station, time the interval between consecutive completions and record the unit, product mix and whether stops are included. Lead time is the elapsed time for the same item to cross the map boundary, including processing, movement and waiting. Timestamp the item at entry and exit. In the manufacturing map, the three process boxes show time spent on one tote. Use consecutive departures to verify each station's cycle time, especially where work overlaps or runs in batches. In mining, a truck cycle includes the empty return. Material lead time to plant feed includes stockpile dwell and ends at a different point.
Use a waste walk to find improvement opportunities
Walk the route with operators during representative shifts. Follow one tote or load and record arrival, start and finish times at each handoff. Note what triggered release, where queues form, how often work is handled twice, and when a station is starved or blocked. Ask operators what happens when the plan changes. Compare observations with timestamps or dispatch logs and look for recurring patterns. Place a numbered kaizen burst on the current-state map where there is an opportunity to investigate. Use the future state to show the change you plan to test and the measure that will tell you whether it helped.
Manufacturing case study
A packaging line traces a representative tote from the start of preparation to the end of packing. Each station receives its own batch schedule. Preparation can release more totes while filling is occupied, and completed totes wait again until packing is ready.
From preparation to packed product
The future state uses a capped first-in, first-out (FIFO) lane and a replenishment signal from packing. Pilot the release rule on one product family. Track tote lead time, queue size, good units packed and any time filling or packing spends waiting for work. If the shorter queue starves a station, adjust the limit using observed variation.
Mining case study
A mine traces material from loading to plant feed. Trucks wait at the tip, and tipped material spends time in the run-of-mine (ROM) buffer. The map follows material to plant feed. It excludes the empty truck return, which should be timed separately when evaluating fleet capacity.
From loading to plant feed
The mine can pilot dispatch decisions that account for both plant intake and stockpile condition. Check whether shorter tip queues merely move waiting upstream. Track plant feed interruptions, tonnes fed, grade and blend conformance, truck turnaround and stockpile levels. Estimate ROM dwell from inventory and flow only when stock and throughput are sufficiently stable. Use material tracking or a reconciled stockpile model where mixing or stock changes make a simple average misleading.
Test the future state
Both maps use guiding figures. Test the proposed changes across representative shifts and compare median and longer lead times alongside output, quality and safety. Shorter lead time can reduce work in process even when system throughput stays the same. Where output also falls short, use Takt Time and Takt Rate to establish the required pace and Theory of Constraints to identify what limits system output.